Schluter JOLLY Tile Edge Protection Profiles

JOLLY Tile Edge Protection Profiles by Schluter Systems

$4.90 - $74.82

This item requires extra processing time. Orders cannot be expedited.

Schluter JOLLY Wall and Countertop Tile Edge Protection Profiles

  • Used as edge protection for the outside corners of tiled surfaces.
  • 2.5 m (8' 2-1/2") Length; Heights of 3 - 12.5 mm (1/8 - 1/2 Inch) available
  • Available in chrome-plated solid brass, color-coated aluminum, anodized Aluminum, and PVC.

Consider an alternative product

L Channel Transition Trim Aluminum and Anodized Aluminum

  • Lower cost
  • Rapid shipping
  • Made in the USA

Schluter-JOLLY Wall and Countertop or Floor Tile Edge Protection Profiles

Application and Function

Schluter-JOLLY is a finishing and edge-protection profile for the outside corners of tiled surfaces.

It features a trapezoid-perforated anchoring leg that is secured in the mortar bond coat beneath the tile, and an 87° sloped vertical wall section that provides a decorative finish and protects adjacent tiles.

The profile is available in chrome-plated solid brass, color-coated aluminum, anodized aluminum, and PVC. Schluter-SCHIENE features the same design as Schluter-JOLLY and is also available in solid brass, aluminum, and stainless steel. Please see the Schluter-Systems Illustrated Price List for more details.

The range of available sizes and finishes permits the matching of Schluter-JOLLY to a wide variety of tile and grout colors and allows many design opportunities through the use of contrasting colors.

Other applications include transitions for dado coverings such as carpet, natural stone, or cold-cured resin coatings. The integrated joint spacer establishes a defined joint cavity between the tile and the profile.

Though JOLLY is typically used in wall/countertop applications, the finishes with yellow background in the table below can be used in floor applications as well.

Available Sizes and Materials

* To complete the item number, add the color code (e.g., A80AGSG)

Note: JOLLY-AC is no longer available in Black (GS). For a black finish, the profile is available in Bright black anodized aluminum (AGSG).

RB and SB are only available in color-cated aluminum in sizes 80, 100, and 125.

Material H = Tile Thickness
1/8" - 3 mm 3/16" - 4.5 mm 1/4" - 6 mm 5/16" - 8 mm 3/8" - 10 mm 1/2" - 12.5 mm
Item Number
PVC (P) -

color*

+ 45

color*

+ 60

color*

+ 80

color*

+ 100

color*

+ 125
Color-coated aluminum (AC) A30 +

color*

A45 +

color*

A60 +

color*

A80 +

color*

A100 +

color*

A125 +

color*

Chrome-plated solid brass (MC) - - MC60 MC80 MC100 MC125
Polished chrome anodized aluminum (ACG) - - A60ACG A80ACG AC100ACG A125ACG
Brushed chrome anodized aluminum (ACGB) - - A60ACGB A80ACGB A100ACGB A125ACGB
Satin nickel anodized aluminum (AT) - - A60AT A80AT A100AT A125AT
Polished nickel anodized aluminum (ATG) - - A60ATG A80ATG A100ATG A125ATG
Brushed nickel anodized aluminum (ATGB) - - A60ATGB A80ATGB A100ATGB A125ATGB
Satin copper/bronze anodized aluminum (AK) - - A60AK A80AK A100AK A125AK
Polished copper/bronze anodized aluminum (AKG) - - A60AKG A80AKG A100AKG A125AKG
Brushed copper/bronze anodized aluminum (AKGB) - - A60AKGB A80AKGB A100AKGB A125AKGB
Brushed antique bronze anodized aluminum (ABGB) - - A60ABGB A80ABGB A100ABGB A125ABGB
Satin brass anodized aluminum (AM) - - A60AM A80AM A100AM A125AM
Polished brass anodized aluminum (AMG) - - A60AMG A80AMG A100AMG A125AMG
Brushed brass anodized aluminum (AMGB) - - A60AMGB A80AMBG A100AMGB A125AMGB
Brushed graphite anodized aluminum (AGRB) - - A60AGRB A80AGRB A100AGRB A125AGRB
Bright black anodized aluminum (AGSG) - A45AGSG A60AGSG A80AGSG A100AGSG A125AGSG

Installation

  1. Select Schluter-JOLLY according to tile thickness.
  2. Using a notched trowel, apply thin-set mortar to the area where profile is to be placed. If Schluter-JOLLY is to be used as edging for outside wall corners, finish tiling one wall first; then trowel thin-set mortar over the corner area of the second wall.
  3. Press the perforated anchoring leg of profile into the mortar and align.
  4. Trowel additional thin-set mortar over the perforated anchoring leg to ensure full coverage and support of the tile edges.
  5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile; the profile should not be higher than the tiled surface, but rather up to approx. 1/32" (1 mm) lower.
  6. Set the tile to the integrated joint spacer, which ensures a uniform joint of 1/16" - 1/8" (1.5 - 3 mm).
  7. Fill the joint completely with grout or setting material.
  8. Work with materials and tools that will not scratch or damage sensitive surfaces. Setting materials and grouts must be removed immediately, especially from anodized aluminum surfaces.

Material

Schluter-JOLLY is available in chrome-plated brass, anodized aluminum, color-coated aluminum, and PVC.

In special cases, the suitability of a proposed type of material must be verified based on the anticipated chemical, mechanical, and/or other stresses.

Schluter-JOLLY, in chrome-plated brass, is a finishing profile that is especially suited for wall corners and transitions. It is ideal for matching chrome fixtures. Surface areas must be protected against abrasion or scratching.

Schluter-JOLLY, in anodized aluminum, features an anodized layer that retains a uniform appearance during normal use. The surface, however, is susceptible to scratching and wear and may be damaged by grout or setting material. Cementitious materials, in conjunction with moisture, become alkaline. Since aluminum is sensitive to alkaline substances, exposure to the alkali (depending on concentration and duration of exposure) may result in corrosion (aluminum oxide formation). Therefore, it is important to remove mortar or grout residue immediately from visible surfaces. In addition, ensure that the profile is solidly embedded in the setting material and that all cavities are filled to prevent the collection of alkaline water.

Schluter-JOLLY, in color-coated aluminum, is pretreated (chromated) aluminum that is color-coated with a polyurethane powder coat. The coating is color-stable, UV-resistant, and suitable for exterior use. Protect the profile against abrasion or scratching.

Schluter-JOLLY, in PVC, is manufactured using pre-colored, rigid PVC that resists bending and scratching. The material is UV-resistant, though not permanently colorstable, in exterior applications. The profile is not suited for corners or transitions subject to heavy mechanical stresses; for example, at stair edges or floor transitions.

Maintenance

Schluter-JOLLY requires no special maintenance or care and is resistant to mold and fungi. Clean the profile using common household cleaning agents.

Do not use abrasive cleaning agents. Damage to the anodized layer can be repaired by applying varnish.

Customer Reviews and Ratings

No reviews yet! Be the first to review this product.

Review This Product

Product Shipping Information

You will be able to estimate shipping amount to your specific destination for your entire cart during the checkout process.

General shipping Information
Copyright © 2012-2020 PSC - Pro Supply Center
BBB Accredited: A+ Rating
Secured by Rapid SSL
Visa MasterCard Discover American Express