Rubi Easy Gres Drill Bits 6-12 mm

Easy Gres Features

• Diamond drill bits to be used with electric drill without percussion.
• The quality of the diamond allows the drilling of earthenware,granite, marble and glass.
• Ideal to put in place bathroom accessories and any type of decorative accessories over ceramic surfaces.
• They must always be used with the Easy Gres guide which allows their adequate guide and refrigeration ensuring a high precision and good results.
• The working speed varies between 400 and 1000 rpm, depending on the material to be drilled.
• Average life between 5 and 10 holes depending on the material.
• Body made of steel and bit made of electrodeposited diamond.
• Lateral opening to improve cooling of the drill bit and to allow the elimination of solid waste produced after the drilling of the hole.
• Recommended speed of use between 400 and 1000 rpm depending of the material to be drilled (See table in page 50).
• To achieve a better finish and a longer life of the drill bit, it's important to observe the adequate speed of use and to apply a moderate pressure during the drilling.
• Must be used with the Easy Gres guide only using the adapter adequate to the diameter of the drill bit for a perfect guide.
• Supplied in blister.

Available Options

Name	Reference
DRILL BIT EASY GRES 6 MM WET CUT	4922
DRILL BIT EASY GRES 6,5 MM WET CUT	4920
DRILL BIT EASY GRES 8 MM WET CUT	4923
DRILL BIT EASY GRES 10 MM WET CUT	4924