Norton SpeedGrip SMC FRP Fiberglass Urethane Adhesive

Norton SpeedGrip/PLIOGRIP SMC/FRP Fiberglass Urethane Adhesive

• Three different but equal formulations each offer a different working time:
  • 3 Minute Formula
    • 3-1/2 minute working time
    • 10 minute clamping/fixture time
    • 30 minute sanding/painting time
  • 10 Minute Formula
    • 17 minute working time
    • 30 minute clamping/fixture time
    • 1 hour sanding/painting time
  • 35 Minute Formula
    • 50 minute working time
    • 90 minute clamping/fixture time
    • 3 hour sanding/painting time
• A quick and versatile system for bonding and repairing steel, aluminum, flexible, semi-rigid and rigid plastic and SMC, FRP and fiberglass
• All products provide the same outstanding performance on these materials
• Times will increase as temperatures decrease
• Times shown are at 77F/25C
• Full cure time is 24 hours but this may be accelerated with heat
• Do not apply polyester based putty/fillers on urethane products
• If polyester putty/filler must be used, skim coat over the SpeedGrip repair area using SpeedGrip rigid repair adhesive or SpeedGrip flexible repair adhesive
• For 400ml use applicator gun 41398 (manual) or 41396 (pneumatic)
• For 600ml use applicator gun 41397 (pneumatic)
• OEM Approved